Scaling Out Prism Central on AHV

In earlier post we learnt how to deploy Prism Central on AHV using 1-Click deployment. To keep things simple, I deployed only one PC vm as I wanted to test how PC scaling out works.

If Prism Central is deployed as single vm, we can expand it to three VMs. PC scale out helps in increasing the capacity and resiliency. 

Note: Prism Central scaling is supported on AHV and ESXi clusters only.

To scale out a Prism Central instance, login to Prism Central and from gear icon select the “Prism Central Management” option. Read More

Prism Central Upgrade Steps

In last post I demonstrated the Prism Central 1-Click installation process. In this post I will walk through the 1-Click upgrade process.

Before you start your Prism Central upgrade, there are few pre-requisites that needs to met. Below screenshot taken from Prism Central Admin guide lists the requirements.

upgrade pre-req.PNG

To upgrade Prism Central to a higher version, Login to Prism Central and click on gear icon and select “Upgrade Prism Central”.

pc-upgrade-1.PNG

If your Prism central have access to internet, you can download the upgrade directly from support portal.  Read More

Prism Central Deployent on AHV

What is Prism Central?

Software to provide centralized infrastructure management, one-click simplicity and intelligent operations. Prism Central runs as a separate instance composed of either a single VM or a set of  (3) VMs.

What does Prism Central provides?

  • Manage multi-cluster from single pane of glass.
  • Single sign-On for all registered clusters.
  • Entity Explorer to search various items.
  • Global alert and notifications.
  • Multi cluster analytics dashboard.
  • Dashboard Customization.
  • Capacity Forecast and Planning

Prism Central is a must have tool for every Nutanix administrator if they have a multi cluster Nutanix environment. In this post I am not stressing on explaining each features of Prism Central. I will write a separate blog post on that. In this post I will walk through the installation procedure for prism central.   Read More

My HCI Lab with Nutanix Community Edition-Part 4: Deploy Multi Node Cluster

In earlier post of this series, we learnt how to deploy a single node cluster. In this post we will learn how to deploy a multi node cluster using community edition.

If you are not following along this series, then I recommend reading earlier posts of this series from below links:

1: Nutanix Community Edition Introduction

2: Lab Setup

3: Deploy Single Node Cluster

During lab setup, I created a template vm to for faster deployments of CE vm’s. To create a multi-node cluster, we node to deploy at least 3 VM’s and during deployment we need to make sure to not to select “Create single-node cluster” Read More

How to Change CVM Memory in Nutanix CE Platform

In last post of this series, I covered installation of Nutanix CE single-node cluster. In this post i will walk through steps of reducing CVM memory.

By default when you deploy Nutanix CE, CVM is configured with 16 GB RAM. You can verify this by logging into Prism and navigating to Home > VM view.

cvm-mem-1.PNG

Or you can SSH to AHV host and type command : virsh dominfo

Now suppose you allocated 20 GB RAM to the VM where Nutanix CE is installed, CVM will consume 16 GB out of it, leaving only 4 GB for the AHV host. But we can reduce CVM memory to 12G or 8G for lab purpose. Read More

My HCI Lab with Nutanix Community Edition-Part 3: Deploy Single Node Cluster

In last post of this series we discussed about lab setup that is needed to deploy the Nutanix CE platform. In this post we will learn about how to deploy a single node cluster.

If you are not following along this series, then I recommend reading earlier posts of this series from below links:

1: Nutanix Community Edition Introduction

2: Lab Setup

In last post we converted our centos VM to a template to save deployment time. I deployed a new VM from the template and booted it. 

Once the “init image” is loaded at the login, type “install” command to proceed. Read More

My HCI Lab with Nutanix Community Edition: Part 2: Lab Setup

In last post of this series we discussed about what Nutanix CE is what does it offer and we talked about limitation of the product. In this post I will walk through my lab setup which I used to deploy the Nutanix CE.

Recommended Hardware

Before planning your deployment, make sure to refer to below spreadsheet which lists all necessary piece of hardware you need to have in place. 

Nutanix CE-HW Specs.png

In my lab, I don’t have a dedicated hardware server for deployment, so I went ahead with Nested virtualization technique. But if you are interested in deploying CE on dedicated piece of hardware then I would recommend reading this article. Read More

My HCI Lab with Nutanix Community Edition: Part 1: Introduction

Till the time I was working majorly on VMware products, I thought there can’t be a better piece of technology than this. But since the time I started learning Nutanix, my thoughts changed and I must admit that I am in awe of this product.

To learn any new product, home lab is the best place where you can learn things from scratch. Since I don’t have dedicated hardware pieces to deploy Nutanix, I tried my hands on Nutanix Community Edition.

In this post I will outline some basic considerations which you should keep in mind when when planning to go with Nutanix CE and will walk through the steps needed to create lab. Also I will discuss possibilities and limits of using this product. Read More

Learning vRNI 3.9: Part 3:User Management in vRNI

In last post of this series we learnt how to change default retention period for events etc in vRNI. In this post we will learn how about user management.

If you are not following along this series, then I recommend reading earlier posts of this series from below links:

1: Adding Data Sources in vRNI

2: Changing Default Data Management Policy

Default installation of vRNI allows you to login with admin@local user and this user can add new users (local and LDAP) and configure memberships and other settings of existing users. In this post we will learn how to add a local and LDAP user to vRNI. Read More

Learning vRNI 3.9: Part 2:Changing Default Data Management Policy

By default the data retention policy in vRNI is one month. However if you have an enterprise license, then you can change this policy.  The data is divided into the following categories:

vrni-data retention

We can change the value of any category and can set it to maximum value specified in above table.

To change the default data retention policy, login to vRNI and navigate to Home > Settings > Data Management. 

Click on configure button to change the values.

vrni-dm-1

From the drop down menu, select the new value for each category which you want to change and hit submit button. Read More

Learning vRNI 3.9: Part 1:Adding Data Sources in vRNI

By default when vRNI 3.9 is installed, it starts in the NSX assessment mode and in this mode you will only see option to add vCenter server as data source.

vrni-ds-1

If you click on Add Data Source, the only option available to you is to add vCenter, Infoblox and Netflow Collector.

vrni-ds-2

In order to add different data sources like NSX Manager or Cisco devices, you need to change the evaluation license and then click on “Switch to Full Product Evaluation” button available in the bottom right corner of vRNI homepage. Read More

vCloud Extender-Part 4: Cloud Provider Registration and VM Migration

In last post of this series, I covered the steps needed to configure on-prem environment to connect it to a cloud provider site. In this post I will demonstrate how to register cloud provider and initiate vm migration using vCloud Extender.

1: Introduction to vCloud Extender

2: vCloud Extender-Cloud Provider Setup

3: vCloud Extender-Tenant (On-Premise) Setup

Lets start with Cloud Provider registration.

Login to On-prem vCenter server webclient and click on vCloud Extender plugin and navigate to Provider Clouds tab. Click on Add a Provider Cloud button. Read More

vCloud Extender-Part 3: Tenant (On-Premise) Setup

In last post of this series we covered the deployment/configuration steps in the cloud provider side. In this post we will learn about how to configure the on-premise (tenant) environment.

If you are not following along this series, then I recommend reading earlier posts of this series from below links:

1: Introduction to vCloud Extender

2: vCloud Extender-Cloud Provider Setup

To connect the Tenant environment with the cloud provider, we need to deploy an instance of vCloud Extender in the on-premise. Deployment is more or less same like service provider side, but with difference that we select deployment type as “cx-connector” a shown in below screenshot. Read More

vCloud Extender-Part 2: Service Provider Setup

In last post of this series, I discussed about vCloud Extender architecture and its capabilities. In this post I will walk through steps of configuring vCloud Extender in cloud provider side.

vCloud Extender is deployed as ova and deployment steps are straight forward as shown in below slide show. Just make sure to select deployment type as “cx-cloud-service” on customization template page.

Once appliance is deployed and boots up, it will show the browser link to access the appliance for further configuration. Read More

vCloud Extender-Part 1:Introduction

What is VMware vCloud Extender?

VMware vCloud Director Extender creates a hybrid cloud environment between an end-user on-premise data center, and a multi-tenant vCloud Director environment. vCloud Extender is replacement for vCloud Connector and this product was released soon after vCloud Director 9.0 was announced. 

What does vCloud Extender offers?

vCloud Extender allows customers to migrate workloads from On-prem vSphere environment to a vCloud Director based Public Cloud. The two migration methods that are available with vCloud Extender are the cold and warm migration and I will talk about these methods in detail in upcoming post of this series. Read More