What is fstab and why it’s useful
fstab is a configuration file that contains information of all the partitions and storage devices in your computer./etc/fstab contains information of where your partitions and storage devices should be mounted and how. /etc/fstab is just a plain text file, so you can open and edit it with any text editor you’re familiar with. However, note that you must have the root privileges before editing fstab. So, in order to edit the file, you must either log in as root or use the su command to become root.
1st and 2nd columns: Device and default mount point
The first and second columns tell the
mount command: what is the device or partition, and what is the mount point. The mount point specified for a device in
/etc/fstab is its default mount point.
What does all this mean? If I type the following command:
$ mount /dev/fd0
… my floppy will be mounted in
/media/floppy, because that’s the default mount point specified in
/etc/fstab. If there is no entry for
/dev/fd0 in my
fstab when I issue the command above,
mount gets very confused because it doesn’t know where to mount the floppy.
< 3rd column: Filesystem type >
The third column in /etc/fstab specifies the filesystem type of the device or partition. Many different filesystems are supported but we’ll take a look at the most common ones only.
ext2 and ext3 Very likely your Linux partitions are Ext3. Ext2 used to be the standard filesystem for Linux, but these days, Ext3 and ReiserFS are usually the default filesystems for almost every new Linux distro.
reiserfs Your Linux partitions may very well be formatted as ReiserFS. Like Ext3, ReiserFS is a journaled filesystem, but it’s much more advanced than Ext3.
swap The filesystem name is self-explanatory. The filesystem type “swap” is used in your swap partitions.
vfat and ntfs Your USB stick is most likely formatted as Vfat (more widely known as FAT32). Your Windows partitions are probably either Vfat or NTFS.
auto No, this isn’t a filesystem type 🙂 The option “auto” simply means that the filesystem type is detected automatically. If you take a look at the example fstab above, you’ll see that the floppy and CD-ROM both have “auto” as their filesystem type. Why? Their filesystem type may vary. One floppy might be formatted for Windows and the other for Linux’s Ext2. That’s why it’s wise to let the system automatically detect the filesystem type of media such as floppies and cdroms.
< 4th column: Mount options >
The fourth column in fstab lists all the mount options for the device or partition. This is also the most confusing column in the fstab file, but knowing what some of the most common options mean, saves you from a big headache. Yes, there are many options available, but I’ll take a look at the most widely used ones only. For more information, check out the man page of mount.
auto and noauto With the auto option, the device will be mounted automatically (at bootup, just like I told you a bit earlier, or when you issue the mount -a command). auto is the default option. If you don’t want the device to be mounted automatically, use the noauto option in /etc/fstab. With noauto, the device can be mounted only explicitly.
user and nouser These are very useful options. The user option allows normal users to mount the device, whereas nouser lets only the root to mount the device. nouser is the default, which is a major cause of headache for new Linux users. If you’re not able to mount your cdrom, floppy, Windows partition, or something else as a normal user, add the user option into /etc/fstab.
exec and noexec exec lets you execute binaries that are on that partition, whereas noexec doesn’t let you do that. noexec might be useful for a partition that contains binaries you don’t want to execute on your system, or that can’t even be executed on your system. This might be the case of a Windows partition.
exec is the default option, which is a good thing. Imagine what would happen if you accidentally used the noexec option with your Linux root partition…
ro Mount the filesystem read-only.
rw Mount the filesystem read-write. Again, using this option might cure the headache of many new Linux users who are tearing their hair off because they can’t write to their floppies, Windows partitions, or something else.
sync and async How the input and output to the filesystem should be done. sync means it’s done synchronously. If you look at the example fstab, you’ll notice that this is the option used with the floppy. In plain English, this means that when you, for example, copy a file to the floppy, the changes are physically written to the floppy at the same time you issue the copy command.
However, if you have the async option in /etc/fstab, input and output is done asynchronously. Now when you copy a file to the floppy, the changes may be physically written to it long time after issuing the command. This isn’t bad, and may sometimes be favorable, but can cause some nasty accidents: if you just remove the floppy without unmounting it first, the copied file may not physically exist on the floppy yet!
async is the default. However, it may be wise to use sync with the floppy, especially if you’re used to the way it’s done in Windows and have a tendency to remove floppies before unmounting them first.
defaults Uses the default options that are rw, suid, dev, exec, auto, nouser, and async.
< 5th and 6th columns: Dump and fsck options >
Dump and, uh, what options? Well, dump is a backup utility and fsck is a filesystem check utility. I won’t discuss them in great length here (they would both need their own tuXfile), but I’ll mention them, because otherwise you’d spend the rest of the day wondering what on God’s green Earth do these things mean.
The 5th column in /etc/fstab is the dump option. Dump checks it and uses the number to decide if a filesystem should be backed up. If it’s zero, dump will ignore that filesystem. If you take a look at the example fstab, you’ll notice that the 5th column is zero in most cases.
The 6th column is a fsck option. fsck looks at the number in the 6th column to determine in which order the filesystems should be checked. If it’s zero, fsck won’t check the filesystem.
< Example /etc/fstab entries >
As an example, we’ll take a look at a couple of
fstab entries that have been a source of endless frustration for new Linux users: floppy and CD-ROM (although these days floppies aren’t that important anymore).
/dev/fd0 /media/floppy auto rw,noauto,user,sync 0 0
This line means that the floppy is mounted to
/media/floppy by default and that its filesystem type is detected automatically. This is useful because the type of the floppy may wary. Note especially the rw and user options: they must be there if you want to be able to mount and write to the floppy as a normal user. If you have trouble with this, check your
fstab file to see if these options are there. Also note the sync option. It can be async just as well, but it’s sync because of reasons discussed a bit earlier.
/dev/cdrom /media/cdrom auto ro,noauto,user,exec 0 0
Note, again, the user option that enables you to mount the CD as a normal user. The CD-ROM has the ro option because it’s no use mounting a CD-ROM read-write because you wouldn’t be able to write to it anyway. Also note the exec option. It’s especially useful if you’d like to be able to execute something from your CD.
Also note that the noauto option is used with the floppy and CD-ROM. This means that they won’t be automatically mounted when your Linux system boots up. This is useful for removable media, because sometimes there won’t be any floppy or CD-ROM when you boot up your system, so there isn’t any reason to try to mount something that doesn’t even exist.